Go to homepage
Catalogue
Wishlist
Request Basket
Skip image gallery

Properties

Betondeckung in mm: 30 mm
Wandstärke in mm: 250 mm

Steel-Duofix

Product number: 63CM25030

Available, delivery time: 1-3 days

Betondeckung in mm
Wandstärke in mm

Price on request

Stück
Stk

Description

Robust mash connector made of steel of 5 mm diameter including two sputtered plastic clamps.

Keeps the distance between the mashes as well as the distance between the meshes and the formwork.

Other concrete cover on request!

Properties

Betondeckung in mm: 30 mm
Wandstärke in mm: 250 mm
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Betondeckung in mm
Wandstärke in mm
Price
Action
63CM200
 Steel-Duofix
25 mm
200 mm
63CM250
 Steel-Duofix
25 mm
250 mm
63CM300
 Steel-Duofix
25 mm
300 mm
63CM30030
 Steel-Duofix
30 mm
300 mm
63CM350
 Steel-Duofix
25 mm
350 mm
63CM35030
 Steel-Duofix
30 mm
350 mm
63CM35035
 Steel-Duofix
35 mm
350 mm
63CM400
 Steel-Duofix
25 mm
400 mm
63CM40030
 Steel-Duofix
30 mm
400 mm
63CM40040
 Steel-Duofix
40 mm
400 mm
Product Nr. : 63CM30030
Steel-Duofix
Price
Betondeckung in mm
30 mm
Wandstärke in mm
300 mm
In Stock

Available, delivery time: 1-3 days

Product Nr. : 63CM35030
Steel-Duofix
Price
Betondeckung in mm
30 mm
Wandstärke in mm
350 mm
In Stock

Available, delivery time: 1-3 days

Product Nr. : 63CM40030
Steel-Duofix
Price
Betondeckung in mm
30 mm
Wandstärke in mm
400 mm
In Stock

Available, delivery time: 1-3 days

Skip product gallery

Customers also viewed

Steel-Duofix
Steel-Duofix
Robust mash connector made of steel of 5 mm diameter including two sputtered plastic clamps. Keeps the distance between the mashes as well as the distance between the meshes and the formwork. Other concrete cover on request!
Steel-Duofix
Steel-Duofix
Robust mash connector made of steel of 5 mm diameter including two sputtered plastic clamps. Keeps the distance between the mashes as well as the distance between the meshes and the formwork. Other concrete cover on request!
Steel-Duofix
Steel-Duofix
Robust mash connector made of steel of 5 mm diameter including two sputtered plastic clamps. Keeps the distance between the mashes as well as the distance between the meshes and the formwork. Other concrete cover on request!
Steel-Duofix
Steel-Duofix
Robust mash connector made of steel of 5 mm diameter including two sputtered plastic clamps. Keeps the distance between the mashes as well as the distance between the meshes and the formwork. Other concrete cover on request!
Triangular strip made of plastic with a strong nail flag
Triangular strip made of plastic with a strong nail flag
Triangular strips made of impact-resistant material for breaking edges on square columns and beams, but also for decorating large exposed concrete parts. Provide nail holes every 10-15 cm for fastening
Steel-Duofix
Steel-Duofix
Robust mash connector made of steel of 5 mm diameter including two sputtered plastic clamps. Keeps the distance between the mashes as well as the distance between the meshes and the formwork. Other concrete cover on request!
Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
Annular seal Basic 1 made of stainless steel, V2A (material no.1.4301) Seal width 40 mm for pressing water up to 2.5 bar completley gastight and watertight built-in torque control EPDM rubber insert DIVIDING THE RING SEAL BASIC 1 To split the annular seal Basic 1, loosen and remove a screw. Unfold the front and rear press segment and cut the rubber press ring radially about 10 mm to the left or right of the screw hole with a sharp knife.
Ringraumdichtung P-Cable Basic HRD Ø150
Ringraumdichtung P-Cable Basic HRD Ø150
The P-Cable Basic HRD annular seal is available in various designs.The following product identification is used: SG x (number of holes) / y-z (area in which the hole can be adjusted)
Ringraumdichtung Basic 1 - Dichtungsbreite 20 mm
Ringraumdichtung Basic 1 - Dichtungsbreite 20 mm
Annular seal Basic 1 made of stainless steel, V2A (material no.1.4301) Seal width 20 mm for non-pressing water up to 1.5 bar completely gastight and watertight built-in torque control EPDM rubber insert DIVIDING THE RING SEAL BASIC 1 To divide the press seal Basic 1, loosen and remove a screw. Unfold the front and rear press segment and cut the rubber press ring radially about 10 mm to the left or right of the screw hole with a sharp knife.
Spacer Speedies floor
Spacer Speedies floor
Application: For concreting floors or concrete slabs as spacers of the lower preservation. Furthermore, the Speedies surface spacers can also be used very well in the concrete precast plant due to the pointed feet. Your advantage: Material polypropylene PP Pressure resistant / Very high stability Ergonomic Transport optimized (europallet) Consumption approx. 1-1,5 pcs./m² Product is patent pending MPA-tested
Skip product gallery

Customers also bought

spacers with plastic nail flags
spacers with plastic nail flags
Chamfer strip made of impact-resistant material to breack edges and also as decoration by extensive exposed-concrete parts. Fixing at an interval of 10-15 cm with nail holes.
Steel-Duofix
Steel-Duofix
Robust mash connector made of steel of 5 mm diameter including two sputtered plastic clamps. Keeps the distance between the mashes as well as the distance between the meshes and the formwork. Other concrete cover on request!
This website uses cookies to ensure the best experience possible. More information...