Properties

Ausführung:	verzinkt
Verstellbereich in m:	2,8 - 4,2 m

Faulenzer (special props)

Product number: 326

Verstellbereich in m

2,0 - 3,5 m

2,1 - 3,8 m

2,8 - 4,2 m

Product request

Salutation

First name*

Last name*

Company name*

Phone number

E-Mail-Address*

Message

Quantity*

Stk

Faulenzer (special props)

Verstellbereich in m: 2,8 - 4,2 m

Message

Fields marked with asterisks (*) are required.

(Product number: 326)

Description

Perpendicular and angle setting

Infinite adjustment with integrated spring base part
Can be clamped between ground and ceiling
Adjustment of the levels possible in varaible heights by sliding eyelets
With synthetic cap on the upper end
From profiled pipe inside 35 x 35, outer 40 x 40 mm

Properties

Ausführung:	verzinkt
Verstellbereich in m:	2,8 - 4,2 m

Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.	Product	Verstellbereich in m
325	Faulenzer (special props)	2,0 - 3,5 m
326	Faulenzer (special props)	2,8 - 4,2 m
328	Faulenzer (special props)	2,1 - 3,8 m

Product Nr. : 325

Faulenzer (special props)

Price

Verstellbereich in m: 2,0 - 3,5 m

In Stock

Available, delivery time: 1-3 days

Product Nr. : 326

Faulenzer (special props)

Price

Verstellbereich in m: 2,8 - 4,2 m

In Stock

Available, delivery time: 1-3 days

Product Nr. : 328

Faulenzer (special props)

Price

Verstellbereich in m: 2,1 - 3,8 m

In Stock

Available, delivery time: 1-3 days

Customers also viewed

Faulenzer (special props)

Perpendicular and angle setting Infinite adjustment with integrated spring base part Can be clamped between ground and ceiling Adjustment of the levels possible in varaible heights by sliding eyelets With synthetic cap on the upper end From profiled pipe inside 35 x 35, outer 40 x 40 mm

Faulenzer (special props)

Deckenstütze Euro (DO) nach EN 1065

Produced and tested according to EN 1065, with visible thread (DO). With failure protection and accident proof. Headplate: 120 x 120 x 8 mm, with borehole Ø 40 mm Headplate: * 140 x 140 x 8 mm, with borehole Ø 40 mm G-hook: Ø 15 mm (no loosing).

Pressure cone standard (PVC-free)

The pressure cones are attached to the spacer tube. After concreting, the pressure cones are removed from the concrete and can be reused.

Betonklötze 20 mm, Vierbein

Gießbetonabstandhalter mit vier Füße. Geeignet für starke Belastung und Sichtbeton durch die schmalle Auflageflächen. Der Abstandhalter hat einen Ösendraht zur Befestigung.

Deckenrandschalung XPS 50 FZ ISO

Slab edge shuttering and insulation in one. 50 mm extruded polystyrene. Foot is made of 4mm fibre cement (Width 10 cm) Elements with tongue and groove. Standard in 1 or 2 metre elements, other lengths on request.

Betonklötze 30 mm, Vierbein

Gießbetonabstandhalter mit vier Füße. Geeignet für starke Belastung und Sichtbeton durch die schmalle Auflageflächen. Der Abstandhalter hat einen Ösendraht zur Befestigung.

Ringraumdichtung P-Cable Basic HRD Ø150

The P-Cable Basic HRD annular seal is available in various designs.The following product identification is used: SG x (number of holes) / y-z (area in which the hole can be adjusted)

Rundfix (PVC-free)

PVC- free spacers for vertical reinforcement.

VIBA mandrel sleeve

Bearing made of plastic to absorb moving forces of VIBA shear force dowel. The quill zone allows a longitudinal movement up to 20 mm. In the colours: yellow gray green blue black available.