Go to homepage
Catalogue
Wishlist
Request Basket
Skip image gallery

Properties

Ausführung: verzinkt
Länge in cm: 250 cm

Doppelgeländer

Product number: 39GL32V
Ausführung
Länge in cm
Stk

Description

  • Simple and safe hooking on the frame for a quick assembly.

Properties

Ausführung: verzinkt
Länge in cm: 250 cm
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Ausführung
Länge in cm
39GL30
 Doppelgeländer
lackiert
125 cm
39GL32
 Doppelgeländer
lackiert
250 cm
39GL32V
 Doppelgeländer
verzinkt
250 cm
Skip product gallery

Customers also viewed

Doppelgeländer
Doppelgeländer
Simple and safe hooking on the frame for a quick assembly.
Baustütze - Mini (DC)
Baustütze - Mini (DC)
With covered thread (DC). Headplate: 120 x 120 x 5 mm, with borehol ø 40 mm G-hook: Ø 12 mm (no loosing) with bearing ring (loose) Failure loads tested at concentric load, pay attention to security factor!
Half frame 1 m x 0,65 lacquered G0150
Half frame 1 m x 0,65 lacquered G0150
Half frame 1,0 x 0,65 cm from tubes 48 x 2,3 mm. All stand parts are varnished or hot-dip galvanized available. Version corresponds ÖNORM B 4007 and HD 1000.
Schalungsbinder SAM 2
Schalungsbinder SAM 2
Suitable for Standard formwork panels width 25, 50 and 100 cm. multiple reusable binder made of steel strip. The length 100 cm is reinforced in the middle.
Baustütze - Mini (DC)
Baustütze - Mini (DC)
With covered thread (DC). Headplate: 120 x 120 x 5 mm, with borehol ø 40 mm G-hook: Ø 12 mm (no loosing) with bearing ring (loose) Failure loads tested at concentric load, pay attention to security factor!
Schalungsbinder SAM 2
Schalungsbinder SAM 2
Suitable for Standard formwork panels width 25, 50 and 100 cm. multiple reusable binder made of steel strip. The length 100 cm is reinforced in the middle.
Baustütze - Mini (DC)
Baustütze - Mini (DC)
With covered thread (DC). Headplate: 120 x 120 x 5 mm, with borehol ø 40 mm G-hook: Ø 12 mm (no loosing) with bearing ring (loose) Failure loads tested at concentric load, pay attention to security factor!
SAM-spacer normal
SAM-spacer normal
Spacer system SAM for normal concrete.(no exposed concrete surface - the walls should be plastered or coverd afterwards) Easy and fast application, in combination with 27 mm Standard formwork panels. Package units:to wall thickness 50 cm 100 pcs. / Packfrom wall thickness 51 cm 50 pcs. / Pack Other special lengths (in cm downgrading) from 6 - 300 cm possible.
SAM Keil
End wedge SAM 1
End wedge SAM 1. to mount the lowest spacer ( in rear hole. in front hole mount binder) also to secure upper binders.
Doppelgeländer
Doppelgeländer
Simple and safe hooking on the frame for a quick assembly.
This website uses cookies to ensure the best experience possible. More information...