Skip to main content Skip to search Skip to main navigation
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Betondeckung in mm
Price
Action
63HV25
Faserbeton Vierkant-Profilstäbe
25 mm
63HV30
Faserbeton Vierkant-Profilstäbe
30 mm
63HV35
Faserbeton Vierkant-Profilstäbe
35 mm
63HV40
Faserbeton Vierkant-Profilstäbe
40 mm
63HV45
Faserbeton Vierkant-Profilstäbe
45 mm
63HV50
Faserbeton Vierkant-Profilstäbe
50 mm
63HV55
Faserbeton Vierkant-Profilstäbe
55 mm
63HV60
Faserbeton Vierkant-Profilstäbe
60 mm
63HV70
Faserbeton Vierkant-Profilstäbe
70 mm
Skip product gallery

Customers also viewed

KG-tube implementation
MPA geprüft! Die KG-Rohrdurchführungen werden in den Durchmessern DN 100 bis DN 200 gefertigt. Alle gängigen Wandstärken von 200 bis 400 mm sind einbaufertig als Doppelmuffenrohr sofort aus Lagervorrat lieferbar. Die Rohrdurchführung ist werkseitig mittig mit einem Mauerkragen versehen, der verhindert, dass Feuchtigkeit ins Bauwerk eindringen kann. Die Rohrdurchführungen eignen sich für den Beton- und Mauerwerksbau. Die druckwasserdichten Hauseinführungen haben eine hohe Witterungs- und Ozonbeständigkeit, sowie eine gute Säure- und Laugenbeständigkeit. Sie können in Bereichen von -30°C bis +100° C eingesetzt werden. Lieferung:Die KG-Rohrdurchführung wird auf Wandstärke gefertigt geliefert.Pro Rohrdurchführung sind zwei Dichtungen und zwei Schalungs- bzw. Verschlussdeckel im Lieferumfang enthalten.Montage KG-Muffenstopfen an die Wandschalung nageln Dichtung in die Rohrdurchführung einlegen. Rohrdurchführung auf den Muffenstopfen schieben. Die zweite Seite der Rohrdurchführung mit dem Stopfen verschließen und mit einem von aussen durch die Schalung geschlagenen Nagel fixieren
Kunststoff-Futterrohr WELLO mit Quellband
WELLO, the lining tube made of PE with an all-round swelling coating. The tube is smooth inside. The undulating outside clings to the concrete. Two swelling tapes applied around the center also prevent water from entering the structure Wello casing, double security through corrugation and swelling tape, sealing by means of an annular seal. Tested up to 30m water column.
Mauerkragen aus TPE - Themoplastischem Elastomer
MPA certificated! Masonry collars from TPE-Themoplastic Elastomer Application area:The sealing collar is used whenever a water-tight lead-through of pipe lines through foundation slabs, walls, and masonry is required. The sealing collar, which has passed the pressure test at 5 bar, prevents moisture from getting into the building along the outer pipe walls. Tested for impermeability up to 50 m water column. Properties:The sealing collar is supplied in pre-assembled condition with 2 stainless steel straps. The circular, 4 cm wide collar, which is equipped with additional waterstops, prevents liquids from getting into the building. Small waterstops inside the collar ensure water-tightness up to a water column of 50 m after tightening of the stainless steel fastening straps.Assembly clean pipe surface if necessary slide on the sealing collar and fix it in the centre of the concrete/wall tighten the fastening straps
Faserbeton Vierkant-Profilstäbe
Square bar spacer made of fibre reinforced concrete. Manufactoring length 100 cm. Also available in different lenghts (e.g. 18, 25 and 33).
Mauerkragen aus TPE - Themoplastischem Elastomer
MPA certificated! Masonry collars from TPE-Themoplastic Elastomer Application area:The sealing collar is used whenever a water-tight lead-through of pipe lines through foundation slabs, walls, and masonry is required. The sealing collar, which has passed the pressure test at 5 bar, prevents moisture from getting into the building along the outer pipe walls. Tested for impermeability up to 50 m water column. Properties:The sealing collar is supplied in pre-assembled condition with 2 stainless steel straps. The circular, 4 cm wide collar, which is equipped with additional waterstops, prevents liquids from getting into the building. Small waterstops inside the collar ensure water-tightness up to a water column of 50 m after tightening of the stainless steel fastening straps.Assembly clean pipe surface if necessary slide on the sealing collar and fix it in the centre of the concrete/wall tighten the fastening straps
Sealing collar KG-FIX 110
The new KG-FIX sealing collar is suitable for sewage pipes DN110 (outer diameter ø 110 mm) and rigid, smooth plastic pipes according to DIN EN 1852-1 / EN 13476 / DIN 16873 / DIN 8061/62, which are used watertight in floor slabs, concrete walls and shafts .is suitable for all common pipe materials. Ø 110 mm Injection molding technology high dimensional stability through 2-components radon proof 25 m water column pressure-tight up to 2.5 bar Materials ABS / TPE checked by KIWA building test
Deckenstütze Euro (DO) nach EN 1065
Produced and tested according to EN 1065, with visible thread (DO). With failure protection and accident proof. Headplate: 120 x 120 x 8 mm, with borehole Ø 40 mm Headplate: * 140 x 140 x 8 mm, with borehole Ø 40 mm G-hook: Ø 15 mm (no loosing).
Faserbeton Vierkant-Profilstäbe
Square bar spacer made of fibre reinforced concrete. Manufactoring length 100 cm. Also available in different lenghts (e.g. 18, 25 and 33).
Kunststoff-Futterrohr WELLO mit Quellband
WELLO, the lining tube made of PE with an all-round swelling coating. The tube is smooth inside. The undulating outside clings to the concrete. Two swelling tapes applied around the center also prevent water from entering the structure Wello casing, double security through corrugation and swelling tape, sealing by means of an annular seal. Tested up to 30m water column.
Deckenstütze Euro (DO) nach EN 1065
Produced and tested according to EN 1065, with visible thread (DO). With failure protection and accident proof. Headplate: 120 x 120 x 8 mm, with borehole Ø 40 mm Headplate: * 140 x 140 x 8 mm, with borehole Ø 40 mm G-hook: Ø 15 mm (no loosing).