Go to homepage
Catalogue
Wishlist
Request Basket
Skip image gallery

Properties

Länge in mm: 95 mm

Ball head anchor 5.0 tons [K5]

Product number: 69OP5000095
Länge in mm
Stk

Description

Ball head anchors are used to transport prefabricated parts.

K5 load group = 5 tons

easy to weld and 3-fold safety against material failure.

Properties

Länge in mm: 95 mm
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Länge in mm
69OP5000095
 Ball head anchor 5.0 tons [K5]
95 mm
69OP50001203
 Ball head anchor 5.0 tons [K5]
120 mm
69OP5000160
 Ball head anchor 5.0 tons [K5]
160 mm
69OP5000180
 Ball head anchor 5.0 tons [K5]
180 mm
69OP5000240
 Ball head anchor 5.0 tons [K5]
240 mm
Skip product gallery

Zubehör

Kugelkopfabheber mit Ovalglied
Kugelkopfabheber mit Ovalglied
suitable for 3.0-5.0 tons and stop at the crossbar.
Details
Aussparungskörper rund aus Gummi für Kugelkopfanker
Aussparungskörper rund aus Gummi für Kugelkopfanker
Aussparungskörper rund aus Gummi für verschiedene Kugelkopfanker.
Details
Skip product gallery

Ähnliche Artikel

Ball head anchors 2,5 Tons [K2,5]
Ball head anchors 2,5 Tons [K2,5]
Ball head anchors are used to transport prefabricated parts. K2.5 load group = 2.5 tons easy to weld and 3-fold safety against material failure.
Details
Skip product gallery

Customers also viewed

Ball head anchor 5.0 tons [K5]
Ball head anchor 5.0 tons [K5]
Ball head anchors are used to transport prefabricated parts. K5 load group = 5 tons easy to weld and 3-fold safety against material failure.
Ball head anchor 5.0 tons [K5]
Ball head anchor 5.0 tons [K5]
Ball head anchors are used to transport prefabricated parts. K5 load group = 5 tons easy to weld and 3-fold safety against material failure.
Kugelkopfabheber mit Ovalglied
Kugelkopfabheber mit Ovalglied
suitable for 3.0-5.0 tons and stop at the crossbar.
Kugelkopfabheber mit Ovalglied
Kugelkopfabheber mit Ovalglied
suitable for 3.0-5.0 tons and stop at the crossbar.
Ball head anchor 5.0 tons [K5]
Ball head anchor 5.0 tons [K5]
Ball head anchors are used to transport prefabricated parts. K5 load group = 5 tons easy to weld and 3-fold safety against material failure.
Ball head anchor 2.5 tons [K2.5]
Ball head anchor 2.5 tons [K2.5]
Ball head anchors are used to transport prefabricated parts. K2.5 load group = 2.5 tons easy to weld and 3-fold safety against material failure.
VITZTHUM - square concrete form
VITZTHUM - square concrete form
Concrete form for square pillars. Easy stripping through integrated division line. 
spacers with nail holes made of plastic
spacers with nail holes made of plastic
spacers made of impact-resistant material for breaking edges on square columns and beams, but also for decorating large exposed concrete parts. Provide nail holes every 10-15 cm for fastening.
Formwork stop GFK conrete grey
Formwork stop GFK conrete grey
Formwork stop made of fibreglass. Pins Ø: 10 mm; Length: 100 mm ADVANTAGES: Non-corrosive High strength and stable Chemical resistance Fast and easy installation INSTALLATION: Mark the position of the formwork with a snap line. Drill periodically holes with a diameter of 10mm along the marking. ATTENTION: Please consider the length of the pins. 
Ball head anchor 2.5 tons [K2.5]
Ball head anchor 2.5 tons [K2.5]
Ball head anchors are used to transport prefabricated parts. K2.5 load group = 2.5 tons easy to weld and 3-fold safety against material failure.
This website uses cookies to ensure the best experience possible. More information...