Flügelschraube für Faulenzer

Abmessung in mm:	10 x 25 mm

Abmessung in mm:	10 x 25 mm

Product Nr.	Product	Abmessung in mm
321F	Flügelschraube für Faulenzer	10 x 25 mm
321F1	Flügelschraube für Faulenzer	8 x 15 mm
321F2	Flügelschraube für Faulenzer	12 x 20 mm

Faulenzer (special props)

Perpendicular and angle setting Infinite adjustment with integrated spring base part Can be clamped between ground and ceiling Adjustment of the levels possible in varaible heights by sliding eyelets With synthetic cap on the upper end From profiled pipe inside 35 x 35, outer 40 x 40 mm

VIBADISTANZ spacer tube (VDZ) incl. 2 plugs

One-piece formwork spacer tube with two sealing plugs, ensuring the specified wall thickness reliably. Spacer tube / cone system tested for watertightness up to 5 bar Fire resistance tested in accordance with EN 1363-1 Complies with the requirements of the W1 guideline

Binding wire MAX-TW898-EG Galvanized

Galvanized binding wire MAX-TW898-EG for RB 398 RB2, RB3 and RB5 series. Box of 50 rolls

Flügelschraube für Faulenzer

Can be ordered in three sizes: Thread length M 8 x 15mm Thread length M 10 x 25 mm Thread length M 12 x 20 mm

VIBADISTANZ spacer tube (VDZ) incl. 2 plugs

One-piece formwork spacer tube with two sealing plugs, ensuring the specified wall thickness reliably. Spacer tube / cone system tested for watertightness up to 5 bar Fire resistance tested in accordance with EN 1363-1 Complies with the requirements of the W1 guideline

VIBADISTANZ spacer tube (VDZ) incl. 2 plugs

One-piece formwork spacer tube with two sealing plugs, ensuring the specified wall thickness reliably. Spacer tube / cone system tested for watertightness up to 5 bar Fire resistance tested in accordance with EN 1363-1 Complies with the requirements of the W1 guideline

FB-Mauerstärken Ø 22mm

Rohraußenseite gerauht. Asbestfrei von Wandstärke 15 bis 50 cm Bei Wandstärken über 50 cm werden Verbundspannstellen empfohlen

Bindedraht blank MAX-TW1525

MAX Draht blank TW1525 für Bindemaschine RB 655.

Flügelschraube für Faulenzer

Can be ordered in three sizes: Thread length M 8 x 15mm Thread length M 10 x 25 mm Thread length M 12 x 20 mm

VIBADISTANZ spacer tube (VDZ) incl. 2 plugs

One-piece formwork spacer tube with two sealing plugs, ensuring the specified wall thickness reliably. Spacer tube / cone system tested for watertightness up to 5 bar Fire resistance tested in accordance with EN 1363-1 Complies with the requirements of the W1 guideline

Properties

Description

Properties