Go to homepage
Catalogue
Wishlist
Request Basket
Skip image gallery

Kanalstrebe

Product number: 25K3
Verstellbereich in cm
Stk

Description

Trench strut single spindle

Head- and baseplate bent at the ends and with nailholes.

Threaded spindle loose at the external tube.

Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Verstellbereich in cm
25K
 Kanalstrebe
55 - 85 cm
25K2
 Kanalstrebe
80 - 130 cm
25K3
 Kanalstrebe
40 - 60 cm
Skip product gallery

Customers also viewed

Steel props STABIL (DC)
Steel props STABIL (DC)
Produced and tested according to EN 1065, with covered thread (DC). Props in different sizes and versions. With failure protection and accident proof. Headplate: class A 120 x 120 x 6 mm, with borehole Ø 40 mm G-hook: Ø 14 mm (no loosing) with bearing ring.  
Kanalstrebe
Kanalstrebe
Trench strut single spindle Head- and baseplate bent at the ends and with nailholes.Threaded spindle loose at the external tube.
Deckenstützen Euro (DC) nach EN 1065
Deckenstützen Euro (DC) nach EN 1065
All versions with failure protection, accident proof. Props in different sizes and versions.Failure loads tested according to EN 1065. Produced and tested according to EN 1065, with covered thread (DC). With failure protection and accident proof. Threaded socket with additional bearing ring (slide ring). Headplate: class A 120 x 120 x 8 mm, with borehole Ø 40 mm G-hook: Ø 14 mm (no loosing) with bearing ring.
Rebar spacer CLOSED
Rebar spacer CLOSED
Spacing strip to use on soft underground. Mill length: 200 cm. Other lenghts available. (PVC - free by request)
Stone cutting machine STEINADLER model BY 300
Stone cutting machine STEINADLER model BY 300
The machines BY 300 and BY 760 are robust stone cutting machines for wet cutting. Provided with diamond dividing discs they are used for cutting bricks, Ytong, concrete, lime sand brick, clinker and similar material. Robust, powerful and longliving due to its very stable construction.   engine: 5,5 kW 400 V 50 HZ water pump: TB 16 0.07 kW 400 V 50 HZ dividing disc: Ø 650 mm Bo 60 mm cut depth: max. 250/265 mm cutting length: 600 mm height adjustment: with tension spring and seesaw overall length: 1620 mm overall width: 750 mm overall height: 1700 mm weight: 248 kg
Baustütze - Mini (DC)
Baustütze - Mini (DC)
With covered thread (DC). Headplate: 120 x 120 x 5 mm, with borehol ø 40 mm G-hook: Ø 12 mm (no loosing) with bearing ring (loose) Failure loads tested at concentric load, pay attention to security factor!
Kanalstrebe
Kanalstrebe
Trench strut single spindle Head- and baseplate bent at the ends and with nailholes.Threaded spindle loose at the external tube.
Baustütze - Mini (DC)
Baustütze - Mini (DC)
With covered thread (DC). Headplate: 120 x 120 x 5 mm, with borehol ø 40 mm G-hook: Ø 12 mm (no loosing) with bearing ring (loose) Failure loads tested at concentric load, pay attention to security factor!
Rundfix (PVC-free)
Rundfix (PVC-free)
PVC- free spacers for vertical reinforcement.  
Faulenzer (special props)
Faulenzer (special props)
Perpendicular and angle setting Infinite adjustment with integrated spring base part Can be clamped between ground and ceiling Adjustment of the levels possible in varaible heights by sliding eyelets With synthetic cap on the upper end From profiled pipe inside 35 x 35, outer 40 x 40 mm
This website uses cookies to ensure the best experience possible. More information...