Skip to main content Skip to search Skip to main navigation
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Aufnahme Gewicht
69OP1512
Kugelkopfabheber mit Ovalglied
2,5 Tonnen
69OP1514
Kugelkopfabheber mit Ovalglied
5,0 Tonnen
Skip product gallery

Zubehör

Ball head anchors 2,5 Tons [K2,5]
Ball head anchors are used to transport prefabricated parts. K2.5 load group = 2.5 tons easy to weld and 3-fold safety against material failure.
Skip product gallery

Customers also viewed

Kugelkopfabheber mit Ovalglied
suitable for 3.0-5.0 tons and stop at the crossbar.
Rundfix (PVC-free)
PVC- free spacers for vertical reinforcement.  
Ball head anchor 2.5 tons [K2.5]
Ball head anchors are used to transport prefabricated parts. K2.5 load group = 2.5 tons easy to weld and 3-fold safety against material failure.
Grooved cone (VIBADISTANZ) Ø 22 mm
Grooved cone (Vibadistant) Ø 22 mm
VIBADISTANZ spacer tube (VDZ) incl. 2 plugs
Formwork spacer tube "made of one piece" with two sealing plugs. Secure the wall thickness reliably! Material: HDPE
Thumb nut
Galvanised accomplishment suitable for tie rod Ø 12,5mm, Ø 15mm, Ø 20mm, Ø 26,5mm
Rebar spacer CLOSED
Spacing strip to use on soft underground. Mill length: 200 cm. Other lenghts available. (PVC - free by request)
Exposed concrete plugs for pressure cone
The high-quality exposed concrete cones are bonded, with contact adhesive X1, in the remaining opening after removing the pressure cones. Apply the contact adhesive on the backside to obtain a clean visible area.  
Thumb nut
Galvanised accomplishment suitable for tie rod Ø 12,5mm, Ø 15mm, Ø 20mm, Ø 26,5mm
Thumb nut
Galvanised accomplishment suitable for tie rod Ø 12,5mm, Ø 15mm, Ø 20mm, Ø 26,5mm