Skip to main content Skip to search Skip to main navigation
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Abmessung in mm
Price
Action
64D15
Wassernase
15 mm
64D20
Wassernase
20 mm
64D30
Wassernase
30 mm
Skip product gallery

Ähnliche Artikel

Drip rail
Type 2: Reusable profile strip. When stripping the formwork, the rail comes out with the formwork.
Skip product gallery

Customers also viewed

Drip rail
Type 1: Gray drip rail  remains in the concrete. Type 2: Reusable profile strip. When stripping the formwork, the rail comes out with the formwork.
Wassernase
Rainfall drips off at the drip edge without hitting the underside of the surface or the vertical wall.
Wassernase
Rainfall drips off at the drip edge without hitting the underside of the surface or the vertical wall.
Drip rail
Type 2: Reusable profile strip. When stripping the formwork, the rail comes out with the formwork.
spacers with plastic nail flags
Chamfer strip made of impact-resistant material to breack edges and also as decoration by extensive exposed-concrete parts. Fixing at an interval of 10-15 cm with nail holes.
Trapezoidal strips PVC
Trapezoidal strip made of PVC. Other dimensions on request.
Doppeldreikantleiste aus PE
Doppelseitige Dreikkantleiste aus PE. Abmessungen: 15/15/25  Schlitz 5 mm
spacers with nail holes made of plastic
spacers made of impact-resistant material for breaking edges on square columns and beams, but also for decorating large exposed concrete parts. Provide nail holes every 10-15 cm for fastening.
Triangular strip made of plastic with a strong nail flag
Triangular strips made of impact-resistant material for breaking edges on square columns and beams, but also for decorating large exposed concrete parts. Provide nail holes every 10-15 cm for fastening
Mauerkragen aus TPE - Themoplastischem Elastomer
MPA certificated! Masonry collars from TPE-Themoplastic Elastomer Application area:The sealing collar is used whenever a water-tight lead-through of pipe lines through foundation slabs, walls, and masonry is required. The sealing collar, which has passed the pressure test at 5 bar, prevents moisture from getting into the building along the outer pipe walls. Tested for impermeability up to 50 m water column. Properties:The sealing collar is supplied in pre-assembled condition with 2 stainless steel straps. The circular, 4 cm wide collar, which is equipped with additional waterstops, prevents liquids from getting into the building. Small waterstops inside the collar ensure water-tightness up to a water column of 50 m after tightening of the stainless steel fastening straps.Assembly clean pipe surface if necessary slide on the sealing collar and fix it in the centre of the concrete/wall tighten the fastening straps