Properties

Ausführung:	verzinkt

Barelle für Deckenstützen

Product number: 36C062V

Ausführung

lackiert

verzinkt

Größe in cm

90 x 70 x 60

110 x 60 x 105

Stk

Description

These barelles are especially suitable for the efficient transport and storage of ceiling props.

Suitable for crane and forklift operation (4 crane hooks on the side).
Easy stacking because of the Conical bell feet
Made from steel tubes with a diameter of 48 mm.
Dimensions L W H are clear dimensions

Properties

Ausführung:	verzinkt

Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.	Product	Ausführung	Größe in cm
36C060	Barelle für Deckenstützen	lackiert	110 x 60 x 105
36C060V	Barelle für Deckenstützen	verzinkt	110 x 60 x 105
36C062	Barelle für Deckenstützen	lackiert	90 x 70 x 60
36C062V	Barelle für Deckenstützen	verzinkt	90 x 70 x 60

Product Nr. : 36C060

Barelle für Deckenstützen

Price

Ausführung: lackiert
Größe in cm: 110 x 60 x 105

In Stock

Available, delivery time: 1-3 days

Product Nr. : 36C060V

Barelle für Deckenstützen

Price

Ausführung: verzinkt
Größe in cm: 110 x 60 x 105

In Stock

Available, delivery time: 1-3 days

Product Nr. : 36C062

Barelle für Deckenstützen

Price

Ausführung: lackiert
Größe in cm: 90 x 70 x 60

In Stock

Available, delivery time: 1-3 days

Product Nr. : 36C062V

Barelle für Deckenstützen

Price

Ausführung: verzinkt
Größe in cm: 90 x 70 x 60

In Stock

Available, delivery time: 1-3 days

Customers also viewed

Barelle für Deckenstützen

These barelles are especially suitable for the efficient transport and storage of ceiling props. Suitable for crane and forklift operation (4 crane hooks on the side). Easy stacking because of the Conical bell feet Made from steel tubes with a diameter of 48 mm. Dimensions L W H are clear dimensions

Barelle Gitterbox

Made from a sturdy tubular construction with four crane hooks, welded-in grid frame 50/50/5 mm and trapezoidal sheet metal floor.Load capacity: 1500 kg. Can be combined with our stacking racks.

Barelle für Deckenstützen

Contact adhesive CEM 805 for swelling waterstop and joint sealing strip

CEM805 is a one-component, neutral-odor sealing and bonding compound based on MS hybrid polymer technology. It is solvent-free, silicone-free and isocyanate-free, cures neutrally, is paint-compatible, weather-resistant and offers good chemical resistance. Applications:Contact adhesive CEM805 is used as a system sealant and installation adhesive for hydrophilic waterstops, joint sealing sheets and concrete plugs. Typical applications include: Sealing and bonding in concrete construction for interior and exterior use Tested for watertightness up to 5.0 bar hydrostatic water pressure (= 50 m water column) in the DualProof System (PVC-P), at product transitions and on concrete surfaces Crack-bridging up to 2.50 mm down to -35°C (crack-bridging class A5) Crack-bridging sealant up to 50 m water column Suitable for use on plaster, gypsum, ceramic, glass, wood, metal and various plastic substrates, as well as galvanized steel and aluminum Well suited for bonding construction foils and membranes Suitable for sealing and bonding applications requiring silicone-free systems on site Butt joint bonding of SilverSeal using CEM805 has been tested and proven watertight up to 2.5 bar (= 25 m water column) Hydrophilic joint tapes (Art. No. 61L) and swelling rubber profiles can be installed in a backflow-proof manner with CEM805 in accordance with German general building authority approval (abP) Also suitable for use with fresh concrete bonded waterproofing systems and joint sealing metal sheets. Note: Do not apply on substrates such as bitumen, tar or coatings that may cause incompatibilities and plasticizer migration. Standards and certification CEM805 contact adhesive is tested as a sealant in accordance with EN 15651-1 and certified as EC1Plus according to EMICODE. Product features and advantages: Ready-to-use MS polymer installation adhesive and sealant, free of silicone, isocyanates and solvents, with a broad adhesion spectrum Elastic Non-corrosive Neutral odor Weathering and aging resistant Good UV resistance Virtually no shrinkage No bubble formation Paint-compatible

Planstand Standard PA 1900 x 880 mm verz.

Planauflage 1900 x 880 mmAußenmaße: Länge 1980 mm, Tiefe 950 mm, Höhe 1920 mmohne TürklappeVordachüberstand 380 mmGewicht: ca. 105 kg

Betontrennmittel VIBA-Trenn - Multi Elio 28

VIBA-Trenn - Multi Elio 28 ist ein gebrauchsfertiges Betontrennmittel, dessen physikalischen Eigenschaften eine einfache Entschalung des Betons nach dem Aushärten ermöglichen.Das Schalöl bildet einen nicht klebrigen Film, der die Trennung des Betons von der Formund eine glatte, perfekte Betonoberäche ermöglicht.Multi Elio 28 ist besonders geeignet für Stahl und nichtsaugende Holzschalungen sowie für Betonelemente die vertikal betoniert werden. Verbrauch:Stahlschalungen : 50 m/l Holzschalungen : 30 m/l

Wheelbarrow type 79961 with ball bearing

Edge of through reinforced with complete round bar. Fastening-screws invisible. Steel-rim wheel 400 x 100 mm. On demand with polymer solid-rubber wheel.

Barelle Gitterbox

Made from a sturdy tubular construction with four crane hooks, welded-in grid frame 50/50/5 mm and trapezoidal sheet metal floor.Load capacity: 1500 kg. Can be combined with our stacking racks.

Nachrüstsatz für Schiebetor rechts öffnend

Mittels eines Nachrüstsatzes lassen sich Bauzäune zu einem Schiebetor ausbauen. Gerade bei beengten Platzverhältnissen bietet sich diese Schiebetorlösung an. Die Schiebetore werden mit Zaunelementen Länge 3,50 m oder 2,20 m hergestellt. bestehend aus: 1 Schieberollenhalter 1 Bockrollenhalter 3 Führungshalter ACHTUNG: Funktioniert nicht mit Round-Top Zäunen.