Skip to main content Skip to search Skip to main navigation
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Länge in m
ø in mm
Price
Action
23G2003
Vitzthum - concrete form TUBE PLUS
3,0 m
200 mm
23G2004
Vitzthum - concrete form TUBE PLUS
4,0 m
200 mm
23G2005
Vitzthum - concrete form TUBE PLUS
5,0 m
200 mm
23G2503
Vitzthum - concrete form TUBE PLUS
3,0 m
250 mm
23G2504
Vitzthum - concrete form TUBE PLUS
4,0 m
250 mm
23G2505
Vitzthum - concrete form TUBE PLUS
5,0 m
250 mm
23G3003
Vitzthum - concrete form TUBE PLUS
3,0 m
300 mm
23G3004
Vitzthum - concrete form TUBE PLUS
4,0 m
300 mm
23G3005
Vitzthum - concrete form TUBE PLUS
5,0 m
300 mm
23G3503
Vitzthum - concrete form TUBE PLUS
3,0 m
350 mm
Skip product gallery

Zubehör

Concrete formwork mounting kit
Concrete formwork mounting set including: 1 x Tensile belts length 4,0 m 2 x Threaded subplate Ø 15 mm, 2 x Wing nuts Ø 15 mm
Bewehrungsspirale für Baurohre
Wire length = 7,5 m Usage length = 1,0 m
Skip product gallery

Ähnliche Artikel

Vitzthum-Baurohr Standard-Spiral
Concrete form round in spiral version. Other lengths on request!
Skip product gallery

Customers also viewed

Mauerkragen aus TPE - Themoplastischem Elastomer
MPA certificated! Masonry collars from TPE-Themoplastic Elastomer Application area:The sealing collar is used whenever a water-tight lead-through of pipe lines through foundation slabs, walls, and masonry is required. The sealing collar, which has passed the pressure test at 5 bar, prevents moisture from getting into the building along the outer pipe walls. Tested for impermeability up to 50 m water column. Properties:The sealing collar is supplied in pre-assembled condition with 2 stainless steel straps. The circular, 4 cm wide collar, which is equipped with additional waterstops, prevents liquids from getting into the building. Small waterstops inside the collar ensure water-tightness up to a water column of 50 m after tightening of the stainless steel fastening straps.Assembly clean pipe surface if necessary slide on the sealing collar and fix it in the centre of the concrete/wall tighten the fastening straps
Mauerkragen aus TPE - Themoplastischem Elastomer
MPA certificated! Masonry collars from TPE-Themoplastic Elastomer Application area:The sealing collar is used whenever a water-tight lead-through of pipe lines through foundation slabs, walls, and masonry is required. The sealing collar, which has passed the pressure test at 5 bar, prevents moisture from getting into the building along the outer pipe walls. Tested for impermeability up to 50 m water column. Properties:The sealing collar is supplied in pre-assembled condition with 2 stainless steel straps. The circular, 4 cm wide collar, which is equipped with additional waterstops, prevents liquids from getting into the building. Small waterstops inside the collar ensure water-tightness up to a water column of 50 m after tightening of the stainless steel fastening straps.Assembly clean pipe surface if necessary slide on the sealing collar and fix it in the centre of the concrete/wall tighten the fastening straps
Meter mark badge RS with brush
The RS20 and RS21 badges are mounted on an unplastered wall and are unmistakable documents for all craftsmen.
Mauerkragen aus TPE - Themoplastischem Elastomer
MPA certificated! Masonry collars from TPE-Themoplastic Elastomer Application area:The sealing collar is used whenever a water-tight lead-through of pipe lines through foundation slabs, walls, and masonry is required. The sealing collar, which has passed the pressure test at 5 bar, prevents moisture from getting into the building along the outer pipe walls. Tested for impermeability up to 50 m water column. Properties:The sealing collar is supplied in pre-assembled condition with 2 stainless steel straps. The circular, 4 cm wide collar, which is equipped with additional waterstops, prevents liquids from getting into the building. Small waterstops inside the collar ensure water-tightness up to a water column of 50 m after tightening of the stainless steel fastening straps.Assembly clean pipe surface if necessary slide on the sealing collar and fix it in the centre of the concrete/wall tighten the fastening straps
Knock-in anchor D&W Ø 15mm type 2 (grooved)
Type 2 grooved With internal thread for O 15 mm Dywidag tie rod. Borehole O 22 mm, borehole depth 95 mm. Permissible load at least 17.0 kN for concrete strength 15N / mm2
Stop end panel with water bar holder wall/wall - plate/plate
Stop end panel made of a wave-profiled perforated metal plate in order to set a stop end in the wall or in the bottom plate.
Stop end panel with water bar holder wall/wall - plate/plate
Stop end panel made of a wave-profiled perforated metal plate in order to set a stop end in the wall or in the bottom plate.
SAM spacers; Exposed concrete already attached
Spacer system SAM for exposed concrete. (the concrete wall remains visible, there is no further cladding) In combination with 27 mm standard formwork panels, can be used quickly and easily. Packing units: up to a wall thickness of 30 cm 100 pieces / box From a wall thickness of 31 cm 50 pieces / box Spacer for quick and economical shuttering of concrete and retaining walls. All special lengths (in cm increments) from 6 - 300 cm possible.
Mauerkragen aus TPE - Themoplastischem Elastomer
MPA certificated! Masonry collars from TPE-Themoplastic Elastomer Application area:The sealing collar is used whenever a water-tight lead-through of pipe lines through foundation slabs, walls, and masonry is required. The sealing collar, which has passed the pressure test at 5 bar, prevents moisture from getting into the building along the outer pipe walls. Tested for impermeability up to 50 m water column. Properties:The sealing collar is supplied in pre-assembled condition with 2 stainless steel straps. The circular, 4 cm wide collar, which is equipped with additional waterstops, prevents liquids from getting into the building. Small waterstops inside the collar ensure water-tightness up to a water column of 50 m after tightening of the stainless steel fastening straps.Assembly clean pipe surface if necessary slide on the sealing collar and fix it in the centre of the concrete/wall tighten the fastening straps
Meter mark badge RS with brush
The RS20 and RS21 badges are mounted on an unplastered wall and are unmistakable documents for all craftsmen.