ISIBLOCK; Zwischenelement für ISITHERM Insulation element made of EPS as intermediate element to ISITHERM connection-element for a continuous insulation plane.
Ringraumdichtung; Compakt Universaldichtung Ø... Core drilling Ø 150 mm Weight approx. 1.2 kg further dimensions on request
Silicone-kit Product description: The neutral silicone is a one-component oxime-linking silicone sealant for expansion joints in the construction sector. After use, the silicone hardens with humidity to form an elastic sealant. Field of use:...
Sechsbein aus Draht 6 mm Extremely stable support for the top layer of reinforcement. corrosion inihibitor hardwearing, big mats-constraint Conforms the DBV-handout support Also availalbe with 1 or 2 crossbars
Sylomer-Polyurethanlager SR11 Sylomer impact sound bearing type SR 11 Area of application Pressure load Deformation Form factor dependent, the specified values apply to form factor q = 3 Static area of application (static loads) up to 0,011 N/mm² approx. 7% Dynamic...
KG-Rohrdurchführung MPA geprüft! Die KG-Rohrdurchführungen werden in den Durchmessern DN 100 bis DN 200 gefertigt. Alle gängigen Wandstärken von 200 bis 400 mm sind einbaufertig als Doppelmuffenrohr sofort aus Lagervorrat lieferbar. Die Rohrdurchführung ist...
Ringraumdichtung P-Cable Basic HRD Ø150 The P-Cable Basic HRD annular seal is available in various designs. The following product identification is used: SG x (number of holes) / y-z (area in which the hole can be adjusted)
Ringraumdichtung P-Cable Basic HRD 200 The P-Cable Basic HRD annular seal is available in various designs. The following product identification is used: SG x (number of holes) / y-z (area in mm which the hole can be adjusted)
Ringraumdichtung P-Cable Basic HRD 125 The P-Cable Basic HRD annular seal is available in various designs. The following product identification is used: SG x (number of holes) / y-z (area in which the hole can be adjusted)
Ringraumdichtung P-Cable Basic HRD 80 The P-Cable Basic HRD annular seal is available in various designs. The following product identification is used: SG x (number of holes) / y-z (area in which the hole can be adjusted)
KG 2000 - Rohrdurchführungen Typ FR Fließrichtung The pipe bushing type FR fulfills the wishes of many building owners and architects to drain sewage from the building in only one direction of flow. The special connection avoids unnecessary edges. Thanks to the watertight, all-round...
Viewed