Skip to main content Skip to search Skip to main navigation
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Ausführung
Wandstärke in mm
Price
Action
62W100394
Wall traverse M10 with ground clip
Safe
200 mm
62W100398
Wall traverse M10 with ground clip
Safe
250 mm
62W100400
Wall traverse M10 with ground clip
Safe
300 mm
62W100444
Wall traverse M10 with ground clip
Solo
200 mm
62W100448
Wall traverse M10 with ground clip
Solo
250 mm
62W100450
Wall traverse M10 with ground clip
Solo
300 mm
Skip product gallery

Ähnliche Artikel

Earthing fixed point Ø 80 mm M 10 / M 12 stainless steel A4 without axis
for connection to the reinforcement of buildings andfor connection for leads
Axis for fixed earthing point
Solo axis with M10 in different lengths for fixed earthing point.
Wall traverse flexible
Wall traverse with M10 gound clips for wall strengths 200 - 500 mm. The position of connectors can be adjusted to different heights and depths. Ground clips V4A stainless steel, steel rope Ø 10 mm Additional type available with water barrier "Safe". 
Skip product gallery

Customers also viewed

Wall traverse M10 with ground clip
Wall traverese with two ground clips M10. Option with water barrier "Safe" and without "Solo". Material: Stainless steel V4A The lightning wall traverse are available in different wall strengths.
Wall traverse M10 with ground clip
Wall traverese with two ground clips M10. Option with water barrier "Safe" and without "Solo". Material: Stainless steel V4A The lightning wall traverse are available in different wall strengths.
Wall traverse M10 with ground clip
Wall traverese with two ground clips M10. Option with water barrier "Safe" and without "Solo". Material: Stainless steel V4A The lightning wall traverse are available in different wall strengths.
Wall traverse M10 with ground clip
Wall traverese with two ground clips M10. Option with water barrier "Safe" and without "Solo". Material: Stainless steel V4A The lightning wall traverse are available in different wall strengths.
Wall traverse M10 with ground clip
Wall traverese with two ground clips M10. Option with water barrier "Safe" and without "Solo". Material: Stainless steel V4A The lightning wall traverse are available in different wall strengths.
Earthing fixed point Ø 80 mm M 10 / M 12 stainless steel A4 without axis
for connection to the reinforcement of buildings andfor connection for leads
Solo axis for fixed earthing point galvanized, length 200 mm, thread M 10
Length 200 mmThread M 10
Mauerkragen aus TPE - Themoplastischem Elastomer
MPA certificated! Masonry collars from TPE-Themoplastic Elastomer Application area:The sealing collar is used whenever a water-tight lead-through of pipe lines through foundation slabs, walls, and masonry is required. The sealing collar, which has passed the pressure test at 5 bar, prevents moisture from getting into the building along the outer pipe walls. Tested for impermeability up to 50 m water column. Properties:The sealing collar is supplied in pre-assembled condition with 2 stainless steel straps. The circular, 4 cm wide collar, which is equipped with additional waterstops, prevents liquids from getting into the building. Small waterstops inside the collar ensure water-tightness up to a water column of 50 m after tightening of the stainless steel fastening straps.Assembly clean pipe surface if necessary slide on the sealing collar and fix it in the centre of the concrete/wall tighten the fastening straps
FB-Mauerstärken
Tube outside roughened. (Asbestos-free) Lenght 1,25m
Wall traverse flexible
Wall traverse with M10 gound clips for wall strengths 200 - 500 mm. The position of connectors can be adjusted to different heights and depths. Ground clips V4A stainless steel, steel rope Ø 10 mm Additional type available with water barrier "Safe".