Go to homepage
Catalogue
Wishlist
Request Basket
Skip image gallery

Properties

Stärke in mm: 25 mm

Sylomer SR 1200/25 weinrot

Product number: 85SR120025
Stärke in mm

Price on request

m²

Description

Sylomer Trittschall-Lager Typ SR 1200

Einsatzbereich Druckbelastung

Verformung

Formfaktorabhängig, die angegebenen Werte gelten für Formfaktor q = 3

Statischer Einsatzbereich
(statische Lasten)

bis 1,2 N/mm²

ca. 11%

Dynamischer Einsatzbereich
(statische und dynamische Lasten)

bis 1,8 N/mm²

ca. 17%

Lastspitzen
(seltene, kurzzeitige Lasten)

bis 6,0 N/mm²

ca. 35%

 

 

 

 

 

 

Properties

Stärke in mm: 25 mm
Downloads "Sylomer SR 1200/25 weinrot"
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Stärke in mm
Price
Action
85SR120012
 Sylomer SR 1200/12 weinrot
12 mm
85SR120025
 Sylomer SR 1200/25 weinrot
25 mm
Skip product gallery

Customers also viewed

Sylomer SR 1200/12 weinrot
Sylomer SR 1200/12 weinrot
Sylomer Trittschall-Lager Typ SR 1200 Einsatzbereich Druckbelastung Verformung Formfaktorabhängig, die angegebenen Werte gelten für Formfaktor q = 3 Statischer Einsatzbereich(statische Lasten) bis 1,2 N/mm² ca. 11% Dynamischer Einsatzbereich(statische und dynamische Lasten) bis 1,8 N/mm² ca. 17% Lastspitzen(seltene, kurzzeitige Lasten) bis 6,0 N/mm² ca. 35%            
spacers with plastic nail flags
spacers with plastic nail flags
Chamfer strip made of impact-resistant material to breack edges and also as decoration by extensive exposed-concrete parts. Fixing at an interval of 10-15 cm with nail holes.
Drip rail
Drip rail
Type 1: Gray drip rail  remains in the concrete. Type 2: Reusable profile strip. When stripping the formwork, the rail comes out with the formwork.
Abstandrohre mit aufgerauter Oberfläche von Ø 20mm bis Ø 40mm in Bunden. Standardlänge ist 2,0 Meter.
Spacer tubes with a roughened surface
Spacer tubes with a roughened surface from Ø 20mm to Ø 40 mm in bundlesØ 20mm to Ø 22mm 100 running meters per bundleØ 26mm to Ø 32mm 50 running meters per bundleØ 40mm 30 running meters per bundle
Exposed concrete plugs for pressure cone
Exposed concrete plugs for pressure cone
The high-quality exposed concrete cones are bonded, with contact adhesive X1, in the remaining opening after removing the pressure cones. Apply the contact adhesive on the backside to obtain a clean visible area.  
Wassernase
Wassernase
Rainfall drips off at the drip edge without hitting the underside of the surface or the vertical wall.
spacers with plastic nail flags
spacers with plastic nail flags
Chamfer strip made of impact-resistant material to breack edges and also as decoration by extensive exposed-concrete parts. Fixing at an interval of 10-15 cm with nail holes.
Drip rail
Drip rail
Type 2: Reusable profile strip. When stripping the formwork, the rail comes out with the formwork.
Formwork oil Prägnit ST300
Formwork oil Prägnit ST300
Tested formwork oil suitable for all formworks. Good degradable with certificate Mixture of mineral oil and plant-based oil Apply a thin layer for best effect with protection of the formwork. No cleaning of the formwork neccessary.  Degredable for 81% within 21 days.
Exposed concrete plugs for pressure cone
Exposed concrete plugs for pressure cone
The high-quality exposed concrete cones are bonded, with contact adhesive X1, in the remaining opening after removing the pressure cones. Apply the contact adhesive on the backside to obtain a clean visible area.  
This website uses cookies to ensure the best experience possible. More information...