Go to homepage
Catalogue
Wishlist
Request Basket
Skip image gallery

Properties

Länge in mm: 400 mm
ø in mm: 20 mm

Steinbohrer mit SDS - Max Aufnahme

Product number: 65CJB20

Available, delivery time: 1-3 days

Länge in mm
ø in mm

Price on request

Stk

Description

The drill hole depth depends on the type of rock and concrete.


Security advice:
Check tie points for load-bearing capacity before loading (- there are different concrete qualities or types of stone)!

Properties

Länge in mm: 400 mm
ø in mm: 20 mm
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Länge in mm
ø in mm
Price
Action
65CJB16400
 Steinbohrer mit SDS - Max Aufnahme
400 mm
16 mm
65CJB16800
 Steinbohrer mit SDS - Max Aufnahme
800 mm
16 mm
65CJB20
 Steinbohrer mit SDS - Max Aufnahme
400 mm
20 mm
65CJB22400
 Steinbohrer mit SDS - Max Aufnahme
400 mm
22 mm
65CJB32450
 Steinbohrer mit SDS - Max Aufnahme
450 mm
32 mm
65CJB32800
 Steinbohrer mit SDS - Max Aufnahme
800 mm
32 mm
65CJB37
 Steinbohrer mit SDS - Max Aufnahme
450 mm
38 mm
Skip product gallery

Customers also viewed

Pressure cone standard (PVC-free)
Pressure cone standard (PVC-free)
The pressure cones are attached to the spacer tube. After concreting, the pressure cones are removed from the concrete and can be reused.
Abstandrohre mit aufgerauter Oberfläche von Ø 20mm bis Ø 40mm in Bunden. Standardlänge ist 2,0 Meter.
Spacer tubes with a roughened surface
Spacer tubes with a roughened surface from Ø 20mm to Ø 40 mm in bundlesØ 20mm to Ø 22mm 100 running meters per bundleØ 26mm to Ø 32mm 50 running meters per bundleØ 40mm 30 running meters per bundle
Pressure cone standard (PVC-free)
Pressure cone standard (PVC-free)
The pressure cones are attached to the spacer tube. After concreting, the pressure cones are removed from the concrete and can be reused.
Fibre concrete triangular rod
Fibre concrete triangular rod
Triangular rod spacer made of fibre reinforced concrete.Manufactoring length 100 cm. Also available in different lenghts (e.g. 18, 25 and 33).
Schalungsbohrer
Schalungsbohrer
Optimal chip evacuation even in deep drill holes, stepped shank with open reversible outlet prevents the drill from jamming, excellent concentricity for exact holes, high load capacity and break resistance thanks to wear-resistant CV steel. Area of application: shuttering boards and panels, soft and hard wood and insulation materials
Contact adhesive CEM 805 for swelling waterstop and joint sealing strip
Contact adhesive CEM 805 for swelling waterstop and joint sealing strip
CEM805 is a one-component, neutral-odor sealing and bonding compound based on MS hybrid polymer technology. It is solvent-free, silicone-free and isocyanate-free, cures neutrally, is paint-compatible, weather-resistant and offers good chemical resistance. Applications:Contact adhesive CEM805 is used as a system sealant and installation adhesive for hydrophilic waterstops, joint sealing sheets and concrete plugs. Typical applications include: Sealing and bonding in concrete construction for interior and exterior use Tested for watertightness up to 5.0 bar hydrostatic water pressure (= 50 m water column) in the DualProof System (PVC-P), at product transitions and on concrete surfaces Crack-bridging up to 2.50 mm down to -35°C (crack-bridging class A5) Crack-bridging sealant up to 50 m water column Suitable for use on plaster, gypsum, ceramic, glass, wood, metal and various plastic substrates, as well as galvanized steel and aluminum Well suited for bonding construction foils and membranes Suitable for sealing and bonding applications requiring silicone-free systems on site Butt joint bonding of SilverSeal using CEM805 has been tested and proven watertight up to 2.5 bar (= 25 m water column) Hydrophilic joint tapes (Art. No. 61L) and swelling rubber profiles can be installed in a backflow-proof manner with CEM805 in accordance with German general building authority approval (abP) Also suitable for use with fresh concrete bonded waterproofing systems and joint sealing metal sheets. Note: Do not apply on substrates such as bitumen, tar or coatings that may cause incompatibilities and plasticizer migration. Standards and certification CEM805 contact adhesive is tested as a sealant in accordance with EN 15651-1 and certified as EC1Plus according to EMICODE. Product features and advantages:  Ready-to-use MS polymer installation adhesive and sealant, free of silicone, isocyanates and solvents, with a broad adhesion spectrum Elastic Non-corrosive Neutral odor Weathering and aging resistant Good UV resistance Virtually no shrinkage No bubble formation Paint-compatible
Ankerhülse Alu mit PVC - Haltestopfen und Doppelkopfnagel
Ankerhülse Alu mit PVC - Haltestopfen und Doppelkopfnagel
With internal thread for Ø 15 mm Dywidag tension rod.Perfect use for fastening slab edge formwork, consoles, scaffolding, guardrails, etc. Permissible load: 28 kN.
Abstandrohre mit aufgerauter Oberfläche von Ø 20mm bis Ø 40mm in Bunden. Standardlänge ist 2,0 Meter.
Spacer tubes with a roughened surface
Spacer tubes with a roughened surface from Ø 20mm to Ø 40 mm in bundlesØ 20mm to Ø 22mm 100 running meters per bundleØ 26mm to Ø 32mm 50 running meters per bundleØ 40mm 30 running meters per bundle
Exposed concrete plugs for pressure cone
Exposed concrete plugs for pressure cone
The high-quality exposed concrete cones are bonded, with contact adhesive X1, in the remaining opening after removing the pressure cones. Apply the contact adhesive on the backside to obtain a clean visible area.  
Fibre concrete blocks
Fibre concrete blocks
Made of fibre concrete for horizontal and vertical reinforcement.  
This website uses cookies to ensure the best experience possible. More information...