Omegaclamp

Fixing clip Ø 3 mm

Fixing clip Ø 2 mm for VIBA-Flexto fix the element joints.

Stop end panel with water bar holder wall/wall - plate/plate

Stop end panel made of a wave-profiled perforated metal plate in order to set a stop end in the wall or in the bottom plate.

VIBA-joint sheet roll ACTIVE - 160 mm unilaterally coated with Bentonit

VIBA thick tin Active is a galvanised, unilaterally full-flatly with active Bentonitcoated sealing metal with source effect. In both forking out a 7,5 cm wide high sticking push connection is raised. incl. 20 connection hangers, 4 push clips + 1,5 m of push connection (self-adhesive)

Construction joint tape internal with stirrups

With internal round steel stirrups.Prevents the belt from bending during the concreting process. Typ a (width) b c f 61AS200 200 mm 70 mm 3,5 mm 15 mm 61AS250 240 mm 80 mm 3,5 mm 15 mm 61AS320 320 mm 100 mm 4,0 mm 15 mm Material: soft PVC; other materials on request!

VIBA-Flex Joint sheet without feet

Joint tape for more stability light angle.The sealing plate is made of galvanised steel and has polymer bitumen coating on both sides (Adhesive coating).

Construction joint tape internal with stirrups

With internal round steel stirrups.Prevents the belt from bending during the concreting process. Typ a (width) b c f 61AS200 200 mm 70 mm 3,5 mm 15 mm 61AS250 240 mm 80 mm 3,5 mm 15 mm 61AS320 320 mm 100 mm 4,0 mm 15 mm Material: soft PVC; other materials on request!

VIBA Sinterflex waterstop sheet

Our VIBA Sinterflex waterstop sheet is coated on both sides with a patented “active” special coating. This coating is non-sticky and does not require any protective film to be removed before concreting. The coating bonds with the concrete through a natural reaction with the surrounding concrete, thereby actively sealing the joint to be waterproofed. The joint is actively sintered by the special coating and therefore becomes increasingly dense over time. This process is referred to as active sintering or active mineralizing deep sealing. The unique bond between the active VIBA Sinterflex special coating and fresh concrete reliably prevents water from migrating around the VIBA Sinterflex waterstop system. For secure sealing, a concrete embedment of only 3 cm is sufficient. VIBA Sinterflex is water-reactive and therefore actively seals construction joints and designed crack joints through a natural concrete-technology process. Water pressures up to and including 5 bar = 50 m water column can be safely sealed.

VIBA-flex joint sheet metal roll - 150 mm

The joint tape roll is made of galvanized stell with a both sided polymer-bitumen coating. The coating is protected by a paper which is lenghtwise split for easier usage. Roll á 20 lfm

VIBA-Flex Joint sheet without feet

Joint tape for more stability light angle.The sealing plate is made of galvanised steel and has polymer bitumen coating on both sides (Adhesive coating).

Spacer Speedies ceiling SH

Application: For concreting storey ceilings or concrete slabs as spacers for the lower reinforcement. Furthermore, the Speedies surface spacers can also be used very well in the precast concrete plant thanks to the pointed feet. With this design, the pointed feet achieve an optimal concrete flow and thereby reduce visibility in the concrete surface. Your advantage: Material polypropylene-PP Pressure-resistant / very high stability Ergonomic Transport-optimized (Euro pallet) Consumption approx. 1-1.5 pieces / m² patent pending MPA approved

Description