Skip to main content Skip to search Skip to main navigation
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Betondeckung in mm
Länge in cm
Price
Action
63H2518KH
Dreikant-Profilstäbe Konkav mit Haken
25 mm
18 cm
63H2533KH
Dreikant-Profilstäbe Konkav mit Haken
25 mm
33 cm
63H3018KH
Dreikant-Profilstäbe Konkav mit Haken
30 mm
18 cm
63H3033KH
Dreikant-Profilstäbe Konkav mit Haken
30 mm
33 cm
63H3518KH
Dreikant-Profilstäbe Konkav mit Haken
35 mm
18 cm
63H3533KH
Dreikant-Profilstäbe Konkav mit Haken
35 mm
33 cm
63H4018KH
Dreikant-Profilstäbe Konkav mit Haken
40 mm
18 cm
63H4033KH
Dreikant-Profilstäbe Konkav mit Haken
40 mm
33 cm
63H4518KH
Dreikant-Profilstäbe Konkav mit Haken
45 mm
18 cm
63H4533KH
Dreikant-Profilstäbe Konkav mit Haken
45 mm
33 cm
Skip product gallery

Customers also viewed

VIBADISTANZ spacer tube (VDZ) incl. 2 plugs
Formwork spacer tube "made of one piece" with two sealing plugs. Secure the wall thickness reliably! Material: HDPE
Dreikant-Profilstäbe Konkav mit Haken
Made of fibre concrete for vertical mats- and round steel reinforcement. Factory length: 18 cm 33 cm Information: Used for vertically reinforcement Easy clip on the reinforcment Continuous threads to break protection  
Painted wall mounting bracket
Console bracket for precast concrete ceilings. In painted design. The bracket can be screwed onto a finished ceiling. The console holder accommodates up to 50 mm.
Formwork stop GFK conrete grey
Formwork stop made of fibreglass. Pins Ø: 10 mm; Length: 100 mm ADVANTAGES: Non-corrosive High strength and stable Chemical resistance Fast and easy installation INSTALLATION: Mark the position of the formwork with a snap line. Drill periodically holes with a diameter of 10mm along the marking. ATTENTION: Please consider the length of the pins. 
Dreikant-Profilstäbe Konkav mit Haken
Made of fibre concrete for vertical mats- and round steel reinforcement. Factory length: 18 cm 33 cm Information: Used for vertically reinforcement Easy clip on the reinforcment Continuous threads to break protection  
Loop Anchor
To anchore single-sided system to the floor, to mount formwork element,  A-frames, scaffolding bracket, etc. Design: Black
Spacer tubes with a roughened surface
Spacer tubes with a roughened surface from Ø 20mm to Ø 40 mm in bundlesØ 20mm to Ø 22mm 100 running meters per bundleØ 26mm to Ø 32mm 50 running meters per bundleØ 40mm 30 running meters per bundle
Concrete screw - Multi-Monti
Verzinkte patentierte Betonschraube mit Sechskant und Flansch ETA-15/0784 und 15/0785 Zulassung- Zwei Einschraubtiefen — Ein echtes Plus für mehr Flexibilität und Wirtschaftlichkeit (alle Hinweise dazu auf der Verpackung) Neuer Schraubenkopf: Sechskantkopf mit angepresster Scheibe Kopfprägung MMS+ Erhöhung des Gewindeaußendurchmessers: Größere hinterschnittene Fläche durch das Gewinde im Beton Optimierte Tragfähigkeit im Beton Überarbeitete Funktionsspitze: Stärkere Verzahnung und größerer Außendurchmesser der Spitze Größerer Hinterschnitt Geringeres Verschleißverhalten der Funktionsspitze Weniger Verschleiß beim Einschrauben Hoher Montagekomfort – geringe Montagedrehmomente Für Befestigungen in Beton nach ETA-15/0784 und ETA-15/0785
Formwork stop block
For fixing the formwork in the lower area. PVC block: This stop is attached off-center with a steel nail and adjusted by turning, then fixed in the center.