Properties
| Ausführung: | verzinkt |
|---|---|
| board Ø: | 130 mm |
| für Ankerstab ø: | 15 mm |
Premium nut galv.
Available, delivery time: 1-3 days
Price on request
Properties
| Ausführung: | verzinkt |
|---|---|
| board Ø: | 130 mm |
| für Ankerstab ø: | 15 mm |
Customers also viewed
Galvanized cast or weldable for anchor rods Ø 12.5 / 15/20 and 26.5 mm.
Ausführung Kunststoff (PVC).Passend für Montageanker groß (65CM15K) und klein (65CM15).Eventuell verschließen mit Stopfen Ø 20 mm. a = Innendurchmesser
Galvanized cast or weldable for anchor rods Ø 12.5 / 15/20 and 26.5 mm.
Type: EXTERNAL RiveStop SS with stainless steel cover plate and stainless steel rivet mandrel. Ideal for exposed concrete walls in combination with the stainless steel cover. Water pressure tight up to 5 bar. Certified by APPLUS. It is recommended to use RiveStop with stainless steel rivets (SS) for sealing with direct water contact and constant pressing water STEP 1: Insert RiveStop into the opening to be sealed. STEP 2: Remove the mandrel. The rivet will expand until the opening is hermetically sealed.
Square Stacking Pallet • Transport and stacking container with a load capacity of 2,000 kg • Suitable for crane and forklift handling (8 lifting eyes at the top) • Can be combined with our stacking pallets 1314 and 1315, solid-wall stacking pallet 1316, or Euro wooden pallets • The raised crossbars allow the stored goods to be loaded and unloaded using a forklift
Stable spacer made of concrete for wall- and ceiling-reinforcement. Also available without wire.
Galvanized cast or weldable for anchor rods Ø 12.5 / 15/20 and 26.5 mm.
Square Stacking Pallet • Transport and stacking container with a load capacity of 2,000 kg • Suitable for crane and forklift handling (8 lifting eyes at the top) • Can be combined with our stacking pallets 1314 and 1315, solid-wall stacking pallet 1316, or Euro wooden pallets • The raised crossbars allow the stored goods to be loaded and unloaded using a forklift
Rock ancor for Ø20mm for secure, load-bearing anchoring to existing concrete or rock walls. The required drill hole is Ø 40-42mm. The drill hole depth depends on the type of rock or concrete. Safety Notice:Before applying any load, check the load-bearing capacity of the anchoring points, as concrete quality and rock properties may vary.