Construction site submersible pump LB-480

Product number: 55LB480

Stk

Description

Technical specifications:

with connection coupling Storz C

The pump is safe to run dry (semi-submerged or in slurping mode)

Power: 0.48 kW, 2.9 A, 230V 50Hz

Delivery rate max. 225 l / min

Sieve hole diameter: Ø 6 mm

Pressure connection diameter: 2 "AG

Scope of delivery: connection cable 10m with plug

Type of medium: rainwater, sand-containing water, groundwater

Delivery height max: 11 m

Weight: 10.4 kg

Immersion depth: 10 m

Min. Water height: 50 mm

Accessories Art. 55 LBE 020: Storz C 52 synthetic fiber hose, length 20 m

Customers also viewed

Formwork plywood cleaner model LA - PA vertical

Clean, save and extend the life time of formwork plywood, planks, etc. The machine cleans and oilis the surface and longitudinal edges of formwork plywood. Tech. Data: Engine: 0,86 kW 400 V 50HZ Mould oil pump: 0,11 kW 400 V 50HZ (with extra switch) Total length: 2815 mm Total width: 880 mm Total height: 1196 mm Weight: 298 kg Max. Work height: 60-500 mm Max. Run power: 15-32 mm

Submersible pump LSC 1.4 S flat suction cup up to 1 mm water level

Technical specifications: with connection coupling Storz C, flat suction cup up to 1mm water level - fire brigade versionThe pump is safe to run dry (semi-submerged or in slurping mode) Power: 0.48 kW, 2.9 A, 230V 50Hz Delivery rate max. 220 l / min Sieve hole diameter: Ø 6mm Pressure connection diameter: 25 mm Scope of delivery: connection cable 10m with plug Type of medium: dirty water Delivery height max: 11 m Weight: 12.0 kg Immersion depth: 10 m Max. Temperature: 40 ° C Accessories Art. 55 LBE 020: Storz C 52 synthetic fiber hose, length 20m The LSC 1.4S flat vacuum cleaner is an ideal fire service pump. It is particularly suitable for extracting residual water up to 1 mm after extinguishing operations. The Storz C version allows flexible operation.

submersible construction site pump HS2.4S with agitator

Lightweight dirty water pump with spiral housing Power 0.4 KW, 2.6 A, 230 volts Delivery rate max: 207 l / min Delivery height max: 12.2 m Immersion depth 10 m Minimum water height 90 mm Pressure connection 2 "AG Temperature max: 40 ° C incl. 10m connection cable

Construction site synthetic fiber hose B 75 lg. 20 m

for the discharge of pumped wastewater. Medium must be able to run out freely - not suitable for operation at high pressure

SAM-exposed concrete element

Put the exposed concrete element on the spacer to get a clean exposed concrete surface after stripping the formwork.

Concrete smoothing machine

BEG 180 Concrete smoothing machine to smooth concrete and floor screed for perfect surface compression. Simple and safe in usage. Solid, reliable and long lifetime through the strong tubular steel frame and worm gear. Special features: steel frame Power transmission with centrifugal clutch Simple Maintenance Gear, Maintenance-free > EINSATZMÖGLICHKEITEN Smoothing and compressing of concrete > TECHNICAL DATA Position Feature Engine 17,6 kW Ø-Working width 2 x 900 mm Work weight 344 kg Ø-Tool 2 x 900 mm Fuel tank 21 l Apply Concrete, floor screed

High-power injector 10 lt. oil-resistant

for fast coating of surfaces (formwork boards, etc.) metal housing

Strukturmatten / Matrizen für Betonwand

Textured formliners from Schalbau Vitzthum in various designs for your exposed concrete wall. The mats can be attached to the formwork either with glue or nails. Processing instructions in the download tab. Tolerance range length and width +/- 2.0 mm

Faserbeton Vierkant-Profilstäbe

Square bar spacer made of fibre reinforced concrete. Manufactoring length 100 cm. Also available in different lenghts (e.g. 18, 25 and 33).

Pressure cones (PVC-free) with glued sealing

Flat seal thickness 8 mm or 2 mm The pressure cones are attached to the spacer tube. After concreting, the pressure cones are removed from the concrete.