Barelle for batter board type 1 galv.
Product number:
36CC
Skip product gallery
Customers also viewed
Tubes for cut outs
Material: Steel blank, optional steel galv. Special materials on request.
Standardlength 3 m, other lengths on request.
Length tolerence for fixed lengths in mm: to DN 250 +/- 5m
Log in to see more information
Three-layer plate Standard, thick: 27 mm
Three layer plywood
weather-resistant glued
Surface with melamine-resin (yellow). Other colours on request.
Special formats on request
Additional millings possible!
All standard cuts are possible!
Teleskop-Nivellierlatte 06-805M
Metric unit of measurement, light and stable aluminum alloy, locking buttons of the individual elements made of durable and abrasion-resistant polycarbonate, level graduation on the front, measuring graduation on the back. ease of movement when pulling out because of the tight tolerance when pulling the profiles, anodized segments printed with weather- and abrasion-resistant varnish. Delivery including protective bag.
Features:
with reverse mm graduation from bottom to top on the back
5 sections
Division in cm and mm
Rebar spacers made of PE
U-shaped bar spacer made of plastic used for the efficient rearrangement of the reinforcement.
Mill length 200 cm.
Other lengths available.
Log in to see more information
Full-wall stacking container galvanized
Full-wall stacking container galvanized.
Stackable transport container, load capacity 1500 kg
Suitable for crane and forklift operation (4 lifting eyes above)
Strongly profiled walls guarantee a high load-bearing capacity
Very stable, despite its low weight
Trapezoidal bottom plate
Barelle Gitterbox
Made from a sturdy tubular construction with four crane hooks, welded-in grid frame 50/50/5 mm and trapezoidal sheet metal floor.Load capacity: 1500 kg. Can be combined with our stacking racks.
Barelle Gitterbox
Made from a sturdy tubular construction with four crane hooks, welded-in grid frame 50/50/5 mm and trapezoidal sheet metal floor.Load capacity: 1500 kg. Can be combined with our stacking racks.
Working platform Nr. 1071
Working platform for only 2 persons and tools.Generally covered with sheet metal at 1.000 mm height and ring-running around protection railing, with worked in entrance ladder on the narrow side.
Working basket at its top end with a springed towing eye and a 1.4 m long rope troop, with 3 guide sheaves at the broadside and shelter.
Tubes for cut outs
Material: Steel blank, optional steel galv. Special materials on request.
Standardlength 3 m, other lengths on request.
Length tolerence for fixed lengths in mm: to DN 250 +/- 5m
Log in to see more information
Barelle für Deckenstützen
These barelles are especially suitable for the efficient transport and storage of ceiling props.
Suitable for crane and forklift operation (4 crane hooks on the side).
Easy stacking because of the Conical bell feet
Made from steel tubes with a diameter of 48 mm.
Dimensions L W H are clear dimensions