Skip to main content Skip to search Skip to main navigation
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Betondeckung in mm
Price
Action
63HR20
Faserbeton Rund-Profilstäbe
20 mm
63HR25
Faserbeton Rund-Profilstäbe
25 mm
63HR30
Faserbeton Rund-Profilstäbe
30 mm
63HR35
Faserbeton Rund-Profilstäbe
35 mm
63HR40
Faserbeton Rund-Profilstäbe
40 mm
Skip product gallery

Customers also viewed

VIBADISTANZ spacer tube (VDZ) incl. 2 plugs
One-piece formwork spacer tube with two sealing plugs, ensuring the specified wall thickness reliably. Spacer tube / cone system tested for watertightness up to 5 bar Fire resistance tested in accordance with EN 1363-1 Complies with the requirements of the W1 guideline
Faserbeton Vierkant-Profilstäbe
Square bar spacer made of fibre reinforced concrete. Manufactoring length 100 cm. Also available in different lenghts (e.g. 18, 25 and 33).
Three-layer plate, width 1m
Three layer plywood weather-resistant glued Surface with  melamine-resin (yellow). Other colours on request. Special formats on request Additional millings possible! All standard cuts are possible!  
Cast concrete spacers
Stable exposed concrete spacer with 4-point batch used for wall- and ceilings-reinforcement  
Doppeldreikantleiste aus PE
Doppelseitige Dreikkantleiste aus PE. Abmessungen: 15/15/25  Schlitz 5 mm
Spacer Twistex PVC-free
Load-bearing construction, also suitable for heavy reinforcement. Shorter length than conventional bottom bar! Flexible and efficient installation thanks to a length of 80 cm. Can also be used upside down on soft surfaces. Test certificate on request.
Spacer tubes with a roughened surface
Spacer tubes with a roughened surface from Ø 20mm to Ø 40 mm in bundlesØ 20mm to Ø 22mm 100 running meters per bundleØ 26mm to Ø 32mm 50 running meters per bundleØ 40mm 30 running meters per bundle
Three-layer plate, width 1m
Three layer plywood weather-resistant glued Surface with  melamine-resin (yellow). Other colours on request. Special formats on request Additional millings possible! All standard cuts are possible!  
ZZ-batten
Skidproofed and tilt secured spacer for the bottom reinforcement. There will be no shrinking as the concrete encloses the batten completly. Due to the special form a linear interruption can be avoided. Mill lenghts 200 cm. Other lenghts available.
Rebar spacers with sidewise recesses
U-shaped bar spacer made of plastic used for the efficient rearrangement of the reinforcement. Mill length 200 cm.  Other lengths on request.