Go to homepage
Catalogue
Wishlist
Request Basket
Skip image gallery

Properties

Breite in mm: 100 mm
Länge in cm: 130 cm

Unischaber HM

Product number: 51AH100
Länge in cm
Breite in mm
Product request
Stk
Unischaber HM
Länge in cm: 130 cm , Breite in mm: 100 mm

Fields marked with asterisks (*) are required.

(Product number: 51AH100)

Description

Universal scrapers with embedded hard metal indexable inserts and bent push knife from special steel.

Handle length 850 or 1300 mm.

  • Simple replaceable shee from quality spring steel.
  • Knot-free handle.

Properties

Breite in mm: 100 mm
Länge in cm: 130 cm
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Breite in mm
Länge in cm
51AH100
 Unischaber HM
100 mm
130 cm
51AH175A
 Unischaber HM
175 mm
85 cm
51AH175B
 Unischaber HM
175 mm
130 cm
Skip product gallery

Customers also viewed

Bauschutzmatte Gummigranulat
Bauschutzmatte Gummigranulat
 
Fleece Geotextile
Fleece Geotextile
Geotex is a mechanic strengthend fleece to split and filter.Main application is gravel, passably and grassed flat roofs. What can Geotex - fleece? Geotex seperate the particle to allow unhindered drain of water. The fleece prevent, even by high drain amount, blockage.
Universal-scrapers 300 mm
Universal-scrapers 300 mm
Width: 300 mm Height: 160 mm with shaft
Sylomer-Polyurethanlager SR110
Sylomer-Polyurethanlager SR110
Sylomer sound bearing bearing type SR110 Area of application Pressure load Deformation Form factor dependent, the specified values apply to form factor q = 3 Static area of application(static loads) up to 0,110 N/mm² approx. 10 % Dynamic area of application(static and dynamic loads) up to 0,160 N/mm² approx. 20% Peak loads(rare, short-term loads) up to 3,0 N/mm² approx. 70%
Bolzen- und Mattenschneider
Bolzen- und Mattenschneider
For commercial reinforcing steel III + IV according to DIN 488 strength approx. 550 N / mm2 as well as prestressing steels and tempered steel wire up to a strength of 1570 N / mm2 (48 HRc) Please note the following when using the bolt cutters: Our bolt cutters are made of the best material. Make sure that the knives are placed at a right angle to the piece to be cut. Stronger structural steels must not be cut through at once. They must first be pressed in firmly, after which the bolt cutter is opened and pushed in again. This makes cutting easier and prevents the knives from breaking. After pressing in, the bolt cutter must not be levered, swiveled or inclined as this would lead to the cutting edges breaking out. The bolt cutters must never be used for hardened steels, concrete or steel nails. The service life of the bolt cutters is enormously extended by regularly tightening the screws.
Concrete spacer with plastic clamps
Concrete spacer with plastic clamps
Stable exposed concrete spacer with 4-point batch used for wall- and ceilings-reinforcement  
PAE-Construction foil
PAE-Construction foil
Other widths and strengths on request. Rated strength less usual tolerance.
Protective mats Super (frost protection)
Protective mats Super (frost protection)
The protective mats SUPER is bothsided coated with a white layer (Summer side) and a black layer (Winter side) Scope of application: Frost protection for Winter (enables concrete work to -5 Degree C without hardness decrease) Evaporation protection Protective covering Heat insulation
Bauschutzmatte Gummigranulat
Bauschutzmatte Gummigranulat
 
Fleece Geotextile
Fleece Geotextile
Geotex is a mechanic strengthend fleece to split and filter.Main application is gravel, passably and grassed flat roofs. What can Geotex - fleece? Geotex seperate the particle to allow unhindered drain of water. The fleece prevent, even by high drain amount, blockage.
This website uses cookies to ensure the best experience possible. More information...