Properties

Liter:	200 L

Mortar bucket made of plastic

Product number: 36B200

Liter

200 L

Stk

Description

Stable cranable mortar bucket with a frame made of steel and extremely stable brackets. The product is TÜV / GS tested.

Made of unbreakable, UV and weather-resistant all-plastic;
on the upper edge of the container with a steel frame and robust eyelets,
suitable for crane transport

Properties

Liter:	200 L

Downloads "Mortar bucket made of plastic"

Download 36B2_DBL_Mrtelkbel_2L-986

Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.	Product	Liter
36B200	Mortar bucket made of plastic	200 L

Product Nr. : 36B200

Mortar bucket made of plastic

Price

Liter: 200 L

In Stock

Available, delivery time: 1-3 days

Customers also viewed

EURO lattice box pallet

EURO lattice box pallet 120 x 80 x 80 cm

Gitter-Stapelbehälter

Stackable transport container, load capacity 1500 kg Suitable for crane and forklift operation (4 lifting eyes above) Side walls made of grid mesh 50 x 50 x 4 mm Trapezoidal sheet metal floor Versions in painted or galvanized.

Stackable transport container

Full-wall stacking container, painted or galvanized. Stackable transport container, load capacity 1500 kg Suitable for crane and forklift operation (4 lifting eyes above) Strongly profiled walls guarantee a high load-bearing capacity Very stable, despite its low weight Trapezoidal bottom plate

Gitter-Stapelbehälter

Collecting tray 210 lt

210-liter painted spill tray with galvanized steel grating.

Fixing clip Ø 3 mm

Fixing clip Ø 2 mm for VIBA-Flexto fix the element joints.

Contact adhesive CEM 805 for swelling waterstop and joint sealing strip

CEM805 is a one-component, neutral-odor sealing and bonding compound based on MS hybrid polymer technology. It is solvent-free, silicone-free and isocyanate-free, cures neutrally, is paint-compatible, weather-resistant and offers good chemical resistance. Applications:Contact adhesive CEM805 is used as a system sealant and installation adhesive for hydrophilic waterstops, joint sealing sheets and concrete plugs. Typical applications include: Sealing and bonding in concrete construction for interior and exterior use Tested for watertightness up to 5.0 bar hydrostatic water pressure (= 50 m water column) in the DualProof System (PVC-P), at product transitions and on concrete surfaces Crack-bridging up to 2.50 mm down to -35°C (crack-bridging class A5) Crack-bridging sealant up to 50 m water column Suitable for use on plaster, gypsum, ceramic, glass, wood, metal and various plastic substrates, as well as galvanized steel and aluminum Well suited for bonding construction foils and membranes Suitable for sealing and bonding applications requiring silicone-free systems on site Butt joint bonding of SilverSeal using CEM805 has been tested and proven watertight up to 2.5 bar (= 25 m water column) Hydrophilic joint tapes (Art. No. 61L) and swelling rubber profiles can be installed in a backflow-proof manner with CEM805 in accordance with German general building authority approval (abP) Also suitable for use with fresh concrete bonded waterproofing systems and joint sealing metal sheets. Note: Do not apply on substrates such as bitumen, tar or coatings that may cause incompatibilities and plasticizer migration. Standards and certification CEM805 contact adhesive is tested as a sealant in accordance with EN 15651-1 and certified as EC1Plus according to EMICODE. Product features and advantages: Ready-to-use MS polymer installation adhesive and sealant, free of silicone, isocyanates and solvents, with a broad adhesion spectrum Elastic Non-corrosive Neutral odor Weathering and aging resistant Good UV resistance Virtually no shrinkage No bubble formation Paint-compatible

Flachdichtung selbstklebend

Self-adhesive sealing rings made of foam rubber. In exposed concrete structures, the sealing rings are inserted between the pressure cone and the formlining to prevent water from separating out of the concrete. By that, a perfect concrete surface is achieved.

Stone cutting machine STEINADLER mod. SR 1000 H

The machine SR 1000 is a robust stone cutting machine for wet cutting. Provided with a diamond dividing disc it is used for cutting bricks, Ytong, concrete, lime sand brick, clinker and similar material. Robust, powerful and longliving due to its very stable construction. Technical data: engine: 7,5 kW 400 V 50 HZ<?xml:namespace prefix = "o" /> water pump: TB 16 0.07 kW 400 V 50 HZ dividing disc: Ø 900 or 1000 mm Bo 60 mm cut depth: max. 365/420 mm cut height: 650 mm feed: automatic with handrail Dimension: overall length 1150 mm overall width 860 mm overall height 2000 mm weight 415 kg

Full-wall stacking container galvanized

Full-wall stacking container galvanized. Stackable transport container, load capacity 1500 kg Suitable for crane and forklift operation (4 lifting eyes above) Strongly profiled walls guarantee a high load-bearing capacity Very stable, despite its low weight Trapezoidal bottom plate