Frame foot lacquered
Product number:
39G0250
Skip product gallery
Customers also viewed
Half frame 1 m x 0,65 lacquered G0150
Half frame 1,0 x 0,65 cm from tubes 48 x 2,3 mm.
All stand parts are varnished or hot-dip galvanized available.
Version corresponds ÖNORM B 4007 and HD 1000.
Foundation anchor glav, height 90 cm
Simple support for the base plate stripping
Because of its expanded earth spike also applicable for soft grounds.
Railing supports 1,0 m laquered G0200
Stand frames from tubes 48 x 2.3 mm.
All stand parts are varnished or hot-dip galvanized available.
Version corresponds ÖNORM B 4007 and HD 1000.
Gerüstplatte (Holzbelag)
Repeatedly glued wood cover plate.
Double security by glueing and with iron rod.
Galvanized edges protection in both sides, for a long lifespan in the hard application.
Faulenzer (special props)
Perpendicular and angle setting
Infinite adjustment with integrated spring base part
Can be clamped between ground and ceiling
Adjustment of the levels possible in varaible heights by sliding eyelets
With synthetic cap on the upper end
From profiled pipe inside 35 x 35, outer 40 x 40 mm
Schrägstütze 3,20 - 5,60 m DC
All versions with failure protection, accident proof.
Universally usable as pressure- and traction props to support and adjust prefabricated concrete elements and formwoks.
Flexible head- and baseplate
Headplate: 140 x 100 x 6 mm, with hole ø 20 mm
G-hook: Ø 14 mm (no loosing)
Seitenschutznetz für den Dachbereich
Protective net for persons fromm PPM
Approx. 4,5 mm thick,
mesh size 100 mm,
with 12 mm edge rope,
height 1,5 m
length 5 m,
according to DIN 32767.
Faulenzer (special props)
Perpendicular and angle setting
Infinite adjustment with integrated spring base part
Can be clamped between ground and ceiling
Adjustment of the levels possible in varaible heights by sliding eyelets
With synthetic cap on the upper end
From profiled pipe inside 35 x 35, outer 40 x 40 mm
